Smart Touch JR

The 1100 can control a 2 speed, 120 volt primary pump, a single speed 120 volt (Water pump/Air pump),  ( TWO PUMP CONTROLER ), a 12 volt spa light, an auxiliary light or accessory and an ozonator. The system comes with a calibrated pressure switch and the attached heating element is 1.5 KW 120 volt heater. This system is intended for the small portable spas that will operate on 120 volt.

USING A CIRCULATION ONLY PUMP, THEN IT WILL CONTROL A CIRCULATION PUMP AND A ONE SPEED PUMP CONFIGERATION....

These controlers are built to last. They will replace brand name spa equipment in small or large hot tubs with all the reliabllity you would expect. The packs are flexible enough to replace different heater placement and heater lengths controling multiple pumps.  They would be an excellent replacement for virtually any spa controler and at the best price in the industry.

OPTIONAL DELUXE TOPSIDE -  Top side digital 3.5" x 7.5" requiring 6" x 2.25" hole size

STANDARD TOPSIDE INCLUDED -  Top side digital 2.5" x 5.5" requiring 4  3/4" X 1 3/4" access hole.

YOU MUST HAVE A DEDICATED 120V / 20 AMP CIRCUIT,  OTHERWISE THE UNIT WILL NOT OPERATE  CORRECTLY WITH OTHER DRAINS ON THE POWER.  ALSO 120V HEATER - HEATS AT ABOUT 1- 1.5 DEG. PER HOUR AND DEPENDS ON OUTSIDE TEMP.   COLDER IT IS , SLOWER IT HEATS.